15311826613
Click to add WeChatWhat is a flotation column? Flotation is often an important part of modern flotation equipment. It can adapt to the complexity of flotation and has a high level of automation. Very high application value. Let’s take a brief look at the advantages of flotation columns, their working principles, and their application environments!
Flotation columns can create a dynamic collision of bubbles and particles suitable for copper and molybdenum flotation. The combined static separation environment has the effects of low operating costs and high key recovery rate, which meets the basic needs of mining enterprises.
The flotation column can effectively improve the efficiency of flotation, and can effectively reduce the number of operations and the amount of circulating ore.
It has a wide range of applications and has a good effect of inhibiting hydrophilic particles, which can effectively increase the flotation concentration and maximize the enrichment ratio.
The use of flotation column technology can effectively reduce the use of chemicals, reduce energy consumption, and is low-cost.
The flotation column technology is simple to develop, has low construction cost, and has high application value.
We can introduce the principle of flotation column from two aspects. On the one hand, it is the technical principle of flotation column, and on the other hand, it is the flotation column. working principle.
Flotation column technology mainly pre-treats copper and copper ores, conducts surface treatment on them, and reasonably controls the hydrophilicity of the surface Analyze and utilize the differences, and use the three-phase flow of solid, liquid and gas to act on copper and molybdenum minerals, thereby completing the separation of mace and molybdenum minerals and completing floating Choose craft.
In actual work, the minerals need to be pre-treated reasonably to turn the minerals into slurry, which can be evenly transported through the ore distributor. In the flotation column, it can move slowly according to the cross section of the flotation column. A dynamic collision of bubbles and particles combined with a static separation environment is constructed inside the flotation column equipment. The air compressor combined with the microporous foamer converts the high-pressure gas into a large number of bubbles, which are evenly distributed on the surface of the mineral. , thus turning it into mineralized bubbles. These mineralized bubbles will show an upward trend in the three-phase flow, become a foam layer on top of the flotation column, and flow into the concentrate tank. The remaining part will be discharged as tailings, thereby effectively completing mineral flotation.
The above is a brief overview of flotation columns. If you want to know more about flotation column products or flotation machine products, you can consult Xinhai Mining.